Mentor Graphics FloEFD 18.0.0 v4459 Standalone/NX/CATIAV5/Creo/SolidEdge Suite x64
download Mentor Graphics FloEFD 18.0.0 v4459 x64 full license forever
Mentor Graphics FloEFD 18.0.0 v4459 for ptc creo 3.0 full
Working with Mentor Graphics FloEFD 18.0.0 v4459 for NX full license
working Mentor Graphics FloEFD 18.0.0 v4459 for Solidadge full
Working with Mentor Graphics FloEFD 18.0.0 v4459 for solidworks full
working Mentor Graphics FloEFD 18.0.0 v4459 for catia full
For CAD dependent installers, the pre-installed 64-bit versions are:
for CATIA V5
CATIA V5 R19 (recommended SP9)
CATIA V5 R20 (recommended SP7)
CATIA V5 R21 (recommended SP6)
CATIA V5-6 2012 (R22) (recommended SP6)
CATIA V5-6 2013 (R23) (recommended SP6)
CATIA V5-6 2014 (R24) (recommended SP7)
CATIA V5-6 2015 (R25) (recommended SP6)
CATIA V5-6 2016 (R26) (recommended SP6)
CATIA V5-6 2017 (R27) (recommended SP4)
CATIA V5-6 2018 (R28) (recommended SP0)
for CREO Parametric
Creo Parametric v2.0 (recommended datecode M250)
Сreo Parametric v3.0 (recommended datecode M160)
Creo Parametric v4.0 (recommended datcode M040)
Creo Parametric v5.0 (recommended datcode v18.104.22.168)
for Siemens NX
Siemens NX 12.0.0, 12.0.1, 12.0.2
Siemens NX 11.0.0, 11.0.1, 11.0.2
Siemens NX 10.0.0, 10.0.2, 10.0.3
Siemens NX 9.0.1, 9.0.2, 9.0.3
Siemens NX 8.5.1, 8.5.2, 8.5.3
for Siemens Solid Edge
Solid edge ST10
Solid edge 2019
Description: FloEFD Standalone version does not require pre-installed CAD systems, is based on advanced Computational Fluid Dynamics (CFD) technology and allows you to analyze a wide range of complex problems, including:
• Analysis of hydro-aerodynamics and heat exchange of two- and three-dimensional models
• Analysis of external and internal flow streams
• Analysis of steady and unsteady flow
• Flow of incompressible fluid and compressible gas, including including combustible mixture, during subsonic, transonic, supersonic, and hypersonic modes of flow
• Water vapor condensation
• Calculation of relative air humidity in gas flows
• Flow and non-Newtonian fluids (only laminar flow regime)
• Flow in compressible fluid (fluid density depends on pressure)
• Flows in real gases
• Laminar, turbulent and unsteady flow analysis
• Analysis of eddy flows and fans
• Flow analysis with solid inclusions
• Analysis of heat transfer within and between liquids and solids
• Analysis of the transfer inside solids in the absence of washing flow
• Calculation of thermal contact resistance
• Calculation of electrical contact resistance
• Thermoelectric coolers
• Heat transfer by radiation
• Joule heating
• Flows with gravity effects (also known as buoyancy effect)
• Porous media
• Heat pipes
• Heat transfer in printed circuit boards
• Heat transfer in perforated plates
• Current of aerosol flows
• Considering the roughness of bodies during flow
• Accounting for the tangential movement of the walls (mixing and rotation)
• Flow in rotating devices
• Cavitation in fluid flow
• Combustion in gas mixtures
FloEFD for NX-CATIAV5-Creo-Solid Edge applications for modeling the flow and heat transfer in liquids and gases in the environment of the corresponding CAD-systems.
FloEFD is fully integrated into the environment of the respective CAD systems and uses solvers based on computational fluid dynamics (CFD) technology.
For CAD-dependent versions, work directly with the model in the environment of the corresponding CAD
There is no need to convert the geometry to another format, often resulting in a loss of quality.
The task of calculating fluid dynamics and heat transfer at any time is completely synchronized with the model
Minimization of efforts, and as a result, errors in the process of synchronization of the set hydrogasdynamic problem and model
Automatic detection of changes in the model.
There is no need for a “manual” construction of the geometry describing the region occupied by the liquid / gas
Automatic detection of the area occupied by the liquid / gas.
The same graphic controls are used as in the other modules of the corresponding CAD.
Very easy to learn
Easy to use
Uses CAD model element tree.
Intuitive and fully interactive
Use when creating a project / processing the results of model elements selected in the graphic window / model tree
Visualization of calculation results in the form of static and animated images directly in the graphics window
Support for exporting results to MS Excel, Word. The ability to play and record animation
Multi-configuration support model
For an effective multi-parameter study, the possibility of project cloning, automatic start of a series of calculations are implemented.
Automated to reduce the number of cases where the analysis of formulation and calculation results requires the involvement of specialists in the field of fluid dynamics and heat transfer
Reliable and fully automatic grid generator
A unique model of turbulence and boundary layer is used.
Automatic control of solution convergence.
Reliable and accurate numerical methods and physical models
A large set of physical models
Ability to calculate very complex structures and physical phenomena.
If you want to download Mentor Graphics FloEFD 18.0.0 v4459 full license, please click to DOWNLOAD symbol and complete check out a little help my website is maintained. The download link is appeared automatically when you complete check out.
Please see youtube video for download instruction by open *.txt file and copy youtube video link paste to your browser If you don’t know how to download.
Inside folder Mentor Graphics FloEFD 18.0.0 v4459, already have crack’s file and instruction how to install Mentor Graphics FloEFD 18.0.0 v4459 step by step. I guarantee you can install Mentor Graphics FloEFD 18.0.0 v4459 successfully if you follow that instruction.
If you also can not install it or any problems, please contact to me by email: email@example.com, then I will help you to install software by teamviewer.
Thanks a lot
93 total views, 1 views today